NinjaTrendAdvanced TradingView Indicator for Multi-Timeframe Trend Analysis with Volume Confirmation
Key Features
Multi-Timeframe Analysis:
Displays trends across H4, H1, M15, and M5 (configurable)
Organized dashboard in the top-right corner
Trend Filters:
Uses 4 EMAs (21, 50, 100, 200 periods - customizable)
Classifies trends as:
SUPER BULLISH ▲
Strong Uptrend
Weak Uptrend
Sideways
Weak Downtrend
Strong Downtrend
SUPER BEARISH ▼
Additional Filters:
ADX to confirm trend strength (configurable)
Volume filter to validate movements (volume above average)
How to Use
Dashboard:
4 columns: Timeframe | ADX | Volume | Trend
Color-coded signals for quick interpretation
Interpretation:
"SUPER" trends (bright green/red) indicate strongest signals
Volume icons:
✅ Confirmed
☑ Not confirmed
ADX values turn orange when above threshold (default: 25)
Customization:
Toggle specific timeframes on/off
Adjust EMA periods
Configure ADX thresholds and volume sensitivity
Indicateurs et stratégies
Daily Range + Trading sessionsIndicator that shows daily ranges on the chart.
Marks every trading session in a day.
PAC INDEXThis indicator plots a Price Action Channel (PAC) using a Smoothed Moving Average (SMMA) of highs and lows, and overlays these bands directly on the main chart. It uses standard Heiken Ashi calculations (not the built-in function) to highlight price structure with an emphasis on trend exhaustion and volatility.
Features
Plots PAC High and PAC Low –
Customizable channel boundaries using SMMA smoothing (user sets lookback length).
Heiken Ashi Calculation (manual):
Heiken Ashi open, close, high, and low are computed per-bar for deeper trend insight.
Visual Channel Fill:
The space between PAC High and Low is filled for instant trend identification.
Condition Markers:
Dots appear above bars when the Heiken Ashi close exceeds the PAC High (potential overextension or momentum).
Dots appear below bars when the Heiken Ashi close falls below the PAC Low (potential exhaustion or reversal).
Configurable:
User can adjust the smoothing length to fit different trading styles or market volatility.
⸻
How To Use
Add to any chart and timeframe (works on all symbols).
Watch the channel:
When Heiken Ashi closes break above the PAC High, price may be in a strong trend or overbought zone.
When Heiken Ashi closes break below the PAC Low, price may be in an exhaustion or potential reversal zone.
Adjust the “Length” parameter for tighter (shorter) or wider (longer) channels depending on your strategy.
Use as a filter for trade entries/exits or to confirm momentum and exhaustion within your price action framework
.
Notes
All calculations are performed directly in the script for transparency and customization.
This indicator is not a buy/sell signal system—interpret breakouts and channel extremes within your own trade plan.
Fixed Trading - JeremyZanXMaps out the range on the 23rd hour of each day for the past 100 days. It then provides some tradable price points based upon the range derived. Meant to be used on the H1 ONLY. Hasn't been programmed to work on any other timeframe.
Adaptive Momentum Scalper (AMS) - ADX/RSI Filters Fixed### 📘 Strategy Description: **Adaptive Momentum Scalper (AMS) – Prop Firm Edition**
The **Adaptive Momentum Scalper (AMS)** is a breakout-based trend-following strategy designed with **prop firm trading rules and risk management** in mind. It combines volatility, momentum, and trend filters with dynamic sizing to manage risk across changing market conditions.
#### ✅ Core Features:
* **Breakout Logic**: Enters long or short when price breaks above/below a short-term range.
* **Momentum Filter**: Confirms breakouts with ATR-based price momentum.
* **Trend Filter**: Uses EMA(20) to ensure directional bias.
* **Volatility Filter**: Requires ATR > ATR average to avoid choppy zones.
* **ADX Filter (Optional)**: Confirms strength of trend (default ADX > 20).
* **RSI Zone Filter (Optional)**: Limits long trades to RSI > 50, shorts to RSI < 50.
* **Dynamic Position Sizing**: Risk-based lot sizing tied to ATR and account equity.
* **Hard SL/TP or Time-Based Exit**: Trades close by target, stop, or max bars in trade.
* **Session Filtering**: Trade only within configured hours (to avoid high spread periods).
* **Prop Firm Safety-Oriented**: Configurable to stay within max drawdown rules.
---
### ⚙️ Settings:
* **Risk per Trade** (% of equity)
* **ATR multipliers** for stop loss and take profit
* **Trading hours** (e.g. 1 AM to 10 PM EST)
* **Max bars in trade before exit**
* **Enable/disable**:
* ADX filter
* RSI filter
---
### 🎯 Ideal Use:
* Scalping on **Gold (XAUUSD)** or other volatile assets.
* Forward testing under prop firm conditions (3% daily / 6% max drawdown).
* Identifying breakout opportunities with strong trend and momentum backing.
Normalized Volume & True RangeThis indicator solves a fundamental challenge that traders face when trying to analyze volume and volatility together on their charts. Traditionally, volume and price volatility exist on completely different scales, making direct comparison nearly impossible. Volume might range from thousands to millions of shares, while volatility percentages typically stay within single digits. This indicator brings both measurements onto a unified scale from 0 to 100 percent, allowing you to see their relationship clearly for the first time.
The core innovation lies in the normalization process, which automatically calculates appropriate scaling factors for both volume and volatility based on their historical statistical properties. Rather than using arbitrary fixed scales that might work for one stock but fail for another, this system adapts to each instrument's unique characteristics. The indicator establishes baseline averages for both measurements and then uses statistical analysis to determine reasonable maximum values, ensuring that extreme outliers don't distort the overall picture.
You can choose from three different volatility calculation methods depending on your analytical preferences. The "Body" option measures the distance between opening and closing prices, focusing on the actual trading range that matters most for price action. The "High/Low" method captures the full daily range including wicks and shadows, giving you a complete picture of intraday volatility. The "Close/Close" approach compares consecutive closing prices, which can be particularly useful for identifying gaps and overnight price movements.
The indicator displays volume as colored columns that match your candlestick colors, making it intuitive to see whether high volume occurred during up moves or down moves. Volatility appears as a gray histogram, providing a clean background reference that doesn't interfere with volume interpretation. Both measurements are clipped at 100 percent, which represents their calculated maximum normal values, so any readings near this level indicate unusually high activity in either volume or volatility.
The baseline reference line shows you what "normal" volume looks like for the current instrument, helping you quickly identify when trading activity is above or below average. Optional moving averages for both volume and volatility are available if you prefer smoothed trend analysis over raw daily values. The entire system updates in real-time as new data arrives, continuously refining its statistical calculations to maintain accuracy as market conditions evolve.
This two-in-one indicator provides a straightforward way to examine how price movements relate to trading volume by presenting both measurements on the same normalized scale, making it easier to spot patterns and relationships that might otherwise remain hidden when analyzing these metrics separately.
Failed 2 Candle Detector (Highlight)Failed 2 bar indicator. Failed two in this indicator is determined by the failed candle closing above or below the 50% level of the previous candle.
EMAs mit RSI & Candlestick-Signalen & großen KerzenkörpernMulti-Signal Indicator: EMAs, Candlestick Patterns & RSI Signals
This versatile indicator combines three proven technical analysis tools in a single script:
🔹 1. Exponential Moving Averages (EMAs)
Multiple EMAs are displayed on the chart, helping to quickly identify trends. You can customize the periods - ideal for short-term and long-term strategies.
🔹 2. candlestick pattern recognition
The indicator automatically recognizes common bullish and bearish candlestick formations such as:
Hammer / Hanging Man
Engulfing Pattern
Doji / Spinning Top
As soon as a pattern is recognized, a visual marker appears on the chart.
🔹 3. RSI-based signals
The Relative Strength Index (RSI) is analyzed to identify overbought and oversold conditions. Additional visual cues help to identify potential reversal points.
✅ Advantages:
All-in-one indicator - no overload from multiple scripts
Visual clarity through clear markings and coloring
Fully customizable in the settings menu
⚙️ Application:
Suitable for traders who want to trade technical patterns, follow trends or react to RSI reversal points.
Note: This indicator is for educational purposes only and is not a substitute for sound trading strategy or financial advice.
Dual SMA Crossover StrategyDual SMA Crossover Strategy with Advanced Risk Management
This Pine Script strategy utilizes a Dual Simple Moving Average (SMA) Crossover system for identifying trend changes, enhanced with comprehensive money and risk management features.
Strategy Logic
The core of the strategy is based on the interaction of two SMAs: a Fast SMA (default 24 periods) and a Slow SMA (default 48 periods).
Long Entry: Triggered when the Fast SMA crosses above the Slow SMA.
Short Entry: Triggered when the Fast SMA crosses below the Slow SMA.
Exit: Positions are closed when an opposite crossover signal occurs.
All trading decisions are made on the close of the candle to prevent any look-ahead bias, ensuring realistic backtest results.
Key Risk Management Features
Money Management:
Risk Per Trade (%): Defines the maximum percentage of account equity to risk on any single trade (default 2.0%). Position sizing is automatically calculated to ensure this risk limit is not exceeded when the Stop Loss is hit.
Stop Loss (SL):
A fixed Stop Loss (%) (default 0.8%) from the entry price is set immediately upon trade entry to limit potential losses.
Take Profit (TP):
A Risk-Reward Ratio (default 2.0) is used to calculate the Take Profit target. For instance, a 2.0 RRR with a 0.8% SL means a 1.6% TP target.
Advanced Trailing Stop Loss (TSL):
Trailing Stop Start (%): The TSL only activates once the trade reaches a predefined profit percentage (default 1.0%).
Trailing Stop Trail (%): Once activated, the TSL moves to lock in profits by trailing the highest (for long) or lowest (for short) price by a specified percentage (default 0.5%). This ensures that the TSL level never falls below the initial Stop Loss, providing continuous risk protection while allowing for further profit accumulation.
This strategy provides a robust framework for trend-following with built-in risk controls, aiming to protect capital and manage potential gains effectively.
SequencerLibSequencerLib v1 is a Pine Script library that helps you track and manage bullish and bearish sequences on your price charts.
Key Features:
Counts and visualizes sequences with customizable labels.
Identifies perfect setups and sequence completions.
Provides support and resistance thresholds based on sequence analysis.
This library is ideal for traders looking to incorporate sequence-based analysis into their strategies, offering clear visual cues and data points for informed decision-making.
Volume and the SMA plus one standard deviationThe 'Volume and the SMA plus one standard deviation' indicator is designed to help traders analyze market activity by visualizing volume dynamics. It plots the current volume alongside two key metrics:
1) The Simple Moving Average (SMA) of volume
2) The SMA plus one standard deviation, enabling traders to identify significant volume spikes that may signal potential price movements.
How It Works:
Volume (blue column): Displays the trading volume for each bar, highlighting periods of high or low market activity.
Basis Volume (orange Line): Represents the SMA of volume over a user-defined period (default: 20 bars). Volumes above this line indicate increased market activity.
SD2 Volume (dark blue Line): Shows the SMA plus one standard deviation of volume. Volumes exceeding this threshold suggest extreme activity, often associated with breakouts, reversals, or significant market events.
Trading Applications:
Confirming Breakouts: A volume spike above the SD2 Volume during a price breakout increases the likelihood of a sustained move. Use this to confirm entries in trend-following strategies.
Identifying Trend Strength: Volumes consistently above the Basis Volume signal strong market participation, supporting trend continuation trades.
Avoiding False Signals: Low volumes below the Basis Volume suggest consolidation or weak movements, helping traders avoid false breakouts or reversals.
Event Detection: Extreme volumes above SD2 Volume often coincide with news events or large player activity, prompting traders to prepare for volatility.
Settings:
Volume SMA Length (default: 20): Adjust the period for calculating the SMA and standard deviation. Shorter periods (e.g., 5–10) increase sensitivity for intraday trading, while longer periods (e.g., 20–50) suit higher timeframes.
Назначение: Индикатор 'Volume and the SMA plus one standard deviation' помогает трейдерам анализировать рыночную активность, визуализируя динамику объемов. Он отображает текущий объем торгов, скользящую среднюю (SMA) объема и SMA плюс одно стандартное отклонение. Позволяя выявлять значительные всплески объема, которые могут сигнализировать о потенциальных движениях цены.
Как работает:
Объем: Показывает объем торгов для каждого бара, выделяя периоды высокой или низкой активности рынка.
Basis Volume line: Представляет SMA объема за заданный период (по умолчанию: 20 баров). Объемы выше этой линии указывают на повышенную рыночную активность.
SD2 Volume line: Показывает SMA плюс одно стандартное отклонение объема. Объемы, превышающие этот уровень, свидетельствуют об экстремальной активности, часто связанной с пробоями, разворотами или значимыми событиями на рынке.
Применение в торговле:
Подтверждение пробоев: Всплеск объема выше SD2 Volume line во время пробоя цены увеличивает вероятность продолжения движения. Используйте для подтверждения входов в трендовые стратегии.
Оценка силы тренда: Объемы, стабильно превышающие Basis Volume line, сигнализируют о сильном участии игроков рынка, поддерживая сделки по тренду.
Избежание ложных сигналов: Низкие объемы ниже Basis Volume указывают на консолидацию или слабые движения, помогая избегать ложных пробоев или разворотов.
Обнаружение событий: Экстремальные объемы выше SD2 Volume часто совпадают с новостями или действиями крупных игроков, что побуждает трейдеров готовиться к волатильности.
Настройки:
Volume SMA Length (по умолчанию: 20)
Настройте период для расчета SMA и стандартного отклонения.
Меньшие значения (5–10) повышают чувствительность для внутридневной торговли.
Большие (20–50) подходят для старших таймфреймов.
Close alertingThis script generates alerts when the current candle CLOSES ABOVE the previous candle's HIGH, or CLOSES BELOW the previous candle's LOW.
✅ Works on ANY timeframe you are viewing (1m, 5m, 15m, 1h, 4h, etc.)
✅ Alerts can be created:
- "Close Above Previous High"
- "Close Below Previous Low"
The script is lightweight and works purely on current chart timeframe. No need to adjust or configure — just add to chart and set Alerts.
Enjoy and safe trading! 🚀
Head-Flag basicAttention:
I've been waiting... seconds, minutes, even hours... But the real one isn't there. They're ghosts, illusions.
Yet, look... the eyes of humanity are fixed on that.
Detailed Description: How to Use the "Head-Flag Basic" Indicator
This indicator is designed to automatically detect classic chart patterns widely used in technical analysis. These patterns help identify possible trend reversals or continuations. The script works on any timeframe and with any asset, as long as data is available.
Patterns Detected by the Indicator
Head and Shoulders
A red cross appears above the bar.
Indicates a potential reversal from an uptrend to a downtrend.
The pattern forms when there’s a higher peak (the head) between two lower peaks (the shoulders), and the current low is below the middle low.
Inverted Head and Shoulders
A green diamond appears below the bar.
Indicates a potential reversal from a downtrend to an uptrend.
The opposite of the previous pattern: there’s a lower trough (the head) between two higher troughs (the shoulders), and the current high exceeds the head’s high.
Bull Flag
A blue flag appears below the bar.
Suggests a potential continuation of an upward trend.
The price forms higher highs and lows, and closes above a recent resistance.
Bear Flag
A yellow flag appears above the bar.
Suggests a potential continuation of a downward trend.
The price forms lower highs and lows, and closes below a recent support.
Ascending Triangle
A purple triangle appears above the bar.
Signals a consolidation pattern with a potential breakout to the upside.
Highs are flat (horizontal resistance), while lows are rising.
Descending Triangle
An orange triangle appears below the bar.
Signals a consolidation pattern with a potential breakout to the downside.
Lows are flat (horizontal support), while highs are falling.
How to Use the Indicator on the Chart
Copy the Pine Script code and paste it into the TradingView Pine Editor.
Click “Add to Chart.”
The indicator will automatically display graphic symbols above or below bars when patterns are detected.
Use the signals as alerts. Always confirm with other tools (such as volume, moving averages, RSI, or support/resistance zones).
Never trade solely based on the indicator. It should serve as a visual clue — not a confirmation by itself.
Final Notes
This is a simple, visual, and straightforward indicator. It helps you notice patterns that may go unnoticed in the market’s flow. However, no tool should be used in isolation. Use it wisely, validate it with broader context, and always follow your risk management plan.
Failed 2 Candle Detector (Highlight)This indicator detects failed 2-bar candles, defined by a close above or below the 50% midpoint of the previous candle.
RSI Divergence + Stochastic (Multi-TF)This indicator builds on the original “ RSI Overbought/Oversold + Divergence Indicator” by seoco This version is re-styled and optimized for clearer table display and easier workflow for active traders.
Key Features & Updates
All original logic and divergence detection preserved.
Modern, accessible color scheme for clarity on dark mode charts (gold, burgundy, aqua, silver).
Table default timeframes optimized for crypto: 23m, 90m, 6h, and 1D.
Expanded and cleaned-up RSI info table: More columns, tighter alignment, and enhanced historical RSI display.
Optional Stochastic RSI overlay.
All table and signal visuals fully user-configurable (timeframes, colors, location, font size).
No changes to divergence formulas or RSI calculation—this remains 1:1 with the original author’s intent.
This version is intended as a visual/UI update for more convenient crypto scanning, not as a core algorithm change.
Feedback and suggestions are welcome
Zigzag Simple [SCL]🟩 OVERVIEW
Draws zigzag lines from pivot Highs to pivot Lows. You can choose between three different ways of calculating pivots:
• True Highs and Lows
• Williams pivots
• Oscillator pivots
🟩 HOW TO USE
This indicator can be used to understand market structure, which is arguably the primary thing you need to be aware of when trading. The zigzag by itself does not display a market structure bias, nor any information about prices of pivots, HH and HL labels, or anything like that. Nevertheless, a simple zigzag is perhaps the easiest and most intuitive way to understand what price is doing.
Choose a pivot style that you like, customise the colours and line style, and enjoy!
🟩 PIVOT TYPES EXPLAINED
True Highs and Lows
This is not an invention of mine (all credit to my humble mentor), but I haven't seen anyone else code them up. A true High is a close below the low of the candle with the highest high. A true Low is a close above the high of a candle with the lowest low. These are solid, price action-based pivots that can sometimes confirm quickly.
Williams pivots
This is how most people calculate pivots. They're simply the highest high for x bars back and x bars forwards. They're the vanilla of pivots IMO: serviceable but not very interesting. They're very convenient to code because there are built-in Pine functions for them: ta.pivothigh and ta.pivotlow . They confirm a predictable number of bars after they happen, which is great for coding but also makes the trader wait for confirmation.
Oscillator pivots
This is a completely different concept, which uses momentum in order to define pivots. For example, when you get a rise in momentum and momentum then drops a configurable amount, it confirms a pivot high, and vice versa for a pivot low. I don't know if anyone else does it –- although some indicators do mark pivots in momentum itself, and plenty do divergences, I wasn't able to find one that specifically marked *pivots in price* because of pivots in momentum 🤷♂️
Anyway, while this approach needs a whole investigation on its own, here we simply plot some pivots in a smoothed RSI. This indicator doesn't plot the actual momentum values -- for a more visual understanding of how this works, refer to the examples in the OscillatorPivots library.
🟩 UNIQUE ADVANTAGES
In contrast to other zigzag indicators available, this one lets you choose between the standard and some more unique methods of generating the zigzags. Additionally, because it's based on libraries, it is relatively easy for programmers to use as a basis for experimentation.
🟩 GEEK STUFF
Although there is considerable practical use for pivot-based zigzags in trading, this script is primarily a demonstration in coding -- specifically the power of libraries!
Most of the script consists of setup, especially defining inputs. The final section sacrifices some readability for conciseness, simply to emphasise how little code you need when the heavy lifting is done by libraries .
The actual calculations and drawing are achieved in just 8 lines.
The equivalent code in the libraries is ~250 lines long.
All libraries used are my own, public and open-source:
• MarketStructure
• DrawZigZag
• OscillatorPivots
Anomalous Holonomy Field Theory🌌 Anomalous Holonomy Field Theory (AHFT) - Revolutionary Quantum Market Analysis
Where Theoretical Physics Meets Trading Reality
A Groundbreaking Synthesis of Differential Geometry, Quantum Field Theory, and Market Dynamics
🔬 THEORETICAL FOUNDATION - THE MATHEMATICS OF MARKET REALITY
The Anomalous Holonomy Field Theory represents an unprecedented fusion of advanced mathematical physics with practical market analysis. This isn't merely another indicator repackaging old concepts - it's a fundamentally new lens through which to view and understand market structure .
1. HOLONOMY GROUPS (Differential Geometry)
In differential geometry, holonomy measures how vectors change when parallel transported around closed loops in curved space. Applied to markets:
Mathematical Formula:
H = P exp(∮_C A_μ dx^μ)
Where:
P = Path ordering operator
A_μ = Market connection (price-volume gauge field)
C = Closed price path
Market Implementation:
The holonomy calculation measures how price "remembers" its journey through market space. When price returns to a previous level, the holonomy captures what has changed in the market's internal geometry. This reveals:
Hidden curvature in the market manifold
Topological obstructions to arbitrage
Geometric phase accumulated during price cycles
2. ANOMALY DETECTION (Quantum Field Theory)
Drawing from the Adler-Bell-Jackiw anomaly in quantum field theory:
Mathematical Formula:
∂_μ j^μ = (e²/16π²)F_μν F̃^μν
Where:
j^μ = Market current (order flow)
F_μν = Field strength tensor (volatility structure)
F̃^μν = Dual field strength
Market Application:
Anomalies represent symmetry breaking in market structure - moments when normal patterns fail and extraordinary opportunities arise. The system detects:
Spontaneous symmetry breaking (trend reversals)
Vacuum fluctuations (volatility clusters)
Non-perturbative effects (market crashes/melt-ups)
3. GAUGE THEORY (Theoretical Physics)
Markets exhibit gauge invariance - the fundamental physics remains unchanged under certain transformations:
Mathematical Formula:
A'_μ = A_μ + ∂_μΛ
This ensures our signals are gauge-invariant observables , immune to arbitrary market "coordinate changes" like gaps or reference point shifts.
4. TOPOLOGICAL DATA ANALYSIS
Using persistent homology and Morse theory:
Mathematical Formula:
β_k = dim(H_k(X))
Where β_k are the Betti numbers describing topological features that persist across scales.
🎯 REVOLUTIONARY SIGNAL CONFIGURATION
Signal Sensitivity (0.5-12.0, default 2.5)
Controls the responsiveness of holonomy field calculations to market conditions. This parameter directly affects the threshold for detecting quantum phase transitions in price action.
Optimization by Timeframe:
Scalping (1-5min): 1.5-3.0 for rapid signal generation
Day Trading (15min-1H): 2.5-5.0 for balanced sensitivity
Swing Trading (4H-1D): 5.0-8.0 for high-quality signals only
Score Amplifier (10-200, default 50)
Scales the raw holonomy field strength to produce meaningful signal values. Higher values amplify weak signals in low-volatility environments.
Signal Confirmation Toggle
When enabled, enforces additional technical filters (EMA and RSI alignment) to reduce false positives. Essential for conservative strategies.
Minimum Bars Between Signals (1-20, default 5)
Prevents overtrading by enforcing quantum decoherence time between signals. Higher values reduce whipsaws in choppy markets.
👑 ELITE EXECUTION SYSTEM
Execution Modes:
Conservative Mode:
Stricter signal criteria
Higher quality thresholds
Ideal for stable market conditions
Adaptive Mode:
Self-adjusting parameters
Balances signal frequency with quality
Recommended for most traders
Aggressive Mode:
Maximum signal sensitivity
Captures rapid market moves
Best for experienced traders in volatile conditions
Dynamic Position Sizing:
When enabled, the system scales position size based on:
Holonomy field strength
Current volatility regime
Recent performance metrics
Advanced Exit Management:
Implements trailing stops based on ATR and signal strength, with mode-specific multipliers for optimal profit capture.
🧠 ADAPTIVE INTELLIGENCE ENGINE
Self-Learning System:
The strategy analyzes recent trade outcomes and adjusts:
Risk multipliers based on win/loss ratios
Signal weights according to performance
Market regime detection for environmental adaptation
Learning Speed (0.05-0.3):
Controls adaptation rate. Higher values = faster learning but potentially unstable. Lower values = stable but slower adaptation.
Performance Window (20-100 trades):
Number of recent trades analyzed for adaptation. Longer windows provide stability, shorter windows increase responsiveness.
🎨 REVOLUTIONARY VISUAL SYSTEM
1. Holonomy Field Visualization
What it shows: Multi-layer quantum field bands representing market resonance zones
How to interpret:
Blue/Purple bands = Primary holonomy field (strongest resonance)
Band width = Field strength and volatility
Price within bands = Normal quantum state
Price breaking bands = Quantum phase transition
Trading application: Trade reversals at band extremes, breakouts on band violations with strong signals.
2. Quantum Portals
What they show: Entry signals with recursive depth patterns indicating momentum strength
How to interpret:
Upward triangles with portals = Long entry signals
Downward triangles with portals = Short entry signals
Portal depth = Signal strength and expected momentum
Color intensity = Probability of success
Trading application: Enter on portal appearance, with size proportional to portal depth.
3. Field Resonance Bands
What they show: Fibonacci-based harmonic price zones where quantum resonance occurs
How to interpret:
Dotted circles = Minor resonance levels
Solid circles = Major resonance levels
Color coding = Resonance strength
Trading application: Use as dynamic support/resistance, expect reactions at resonance zones.
4. Anomaly Detection Grid
What it shows: Fractal-based support/resistance with anomaly strength calculations
How to interpret:
Triple-layer lines = Major fractal levels with high anomaly probability
Labels show: Period (H8-H55), Price, and Anomaly strength (φ)
⚡ symbol = Extreme anomaly detected
● symbol = Strong anomaly
○ symbol = Normal conditions
Trading application: Expect major moves when price approaches high anomaly levels. Use for precise entry/exit timing.
5. Phase Space Flow
What it shows: Background heatmap revealing market topology and energy
How to interpret:
Dark background = Low market energy, range-bound
Purple glow = Building energy, trend developing
Bright intensity = High energy, strong directional move
Trading application: Trade aggressively in bright phases, reduce activity in dark phases.
📊 PROFESSIONAL DASHBOARD METRICS
Holonomy Field Strength (-100 to +100)
What it measures: The Wilson loop integral around price paths
>70: Strong positive curvature (bullish vortex)
<-70: Strong negative curvature (bearish collapse)
Near 0: Flat connection (range-bound)
Anomaly Level (0-100%)
What it measures: Quantum vacuum expectation deviation
>70%: Major anomaly (phase transition imminent)
30-70%: Moderate anomaly (elevated volatility)
<30%: Normal quantum fluctuations
Quantum State (-1, 0, +1)
What it measures: Market wave function collapse
+1: Bullish eigenstate |↑⟩
0: Superposition (uncertain)
-1: Bearish eigenstate |↓⟩
Signal Quality Ratings
LEGENDARY: All quantum fields aligned, maximum probability
EXCEPTIONAL: Strong holonomy with anomaly confirmation
STRONG: Good field strength, moderate anomaly
MODERATE: Decent signals, some uncertainty
WEAK: Minimal edge, high quantum noise
Performance Metrics
Win Rate: Rolling performance with emoji indicators
Daily P&L: Real-time profit tracking
Adaptive Risk: Current risk multiplier status
Market Regime: Bull/Bear classification
🏆 WHY THIS CHANGES EVERYTHING
Traditional technical analysis operates on 100-year-old principles - moving averages, support/resistance, and pattern recognition. These work because many traders use them, creating self-fulfilling prophecies.
AHFT transcends this limitation by analyzing markets through the lens of fundamental physics:
Markets have geometry - The holonomy calculations reveal this hidden structure
Price has memory - The geometric phase captures path-dependent effects
Anomalies are predictable - Quantum field theory identifies symmetry breaking
Everything is connected - Gauge theory unifies disparate market phenomena
This isn't just a new indicator - it's a new way of thinking about markets . Just as Einstein's relativity revolutionized physics beyond Newton's mechanics, AHFT revolutionizes technical analysis beyond traditional methods.
🔧 OPTIMAL SETTINGS FOR MNQ 10-MINUTE
For the Micro E-mini Nasdaq-100 on 10-minute timeframe:
Signal Sensitivity: 2.5-3.5
Score Amplifier: 50-70
Execution Mode: Adaptive
Min Bars Between: 3-5
Theme: Quantum Nebula or Dark Matter
💭 THE JOURNEY - FROM IMPOSSIBLE THEORY TO TRADING REALITY
Creating AHFT was a mathematical odyssey that pushed the boundaries of what's possible in Pine Script. The journey began with a seemingly impossible question: Could the profound mathematical structures of theoretical physics be translated into practical trading tools?
The Theoretical Challenge:
Months were spent diving deep into differential geometry textbooks, studying the works of Chern, Simons, and Witten. The mathematics of holonomy groups and gauge theory had never been applied to financial markets. Translating abstract mathematical concepts like parallel transport and fiber bundles into discrete price calculations required novel approaches and countless failed attempts.
The Computational Nightmare:
Pine Script wasn't designed for quantum field theory calculations. Implementing the Wilson loop integral, managing complex array structures for anomaly detection, and maintaining computational efficiency while calculating geometric phases pushed the language to its limits. There were moments when the entire project seemed impossible - the script would timeout, produce nonsensical results, or simply refuse to compile.
The Breakthrough Moments:
After countless sleepless nights and thousands of lines of code, breakthrough came through elegant simplifications. The realization that market anomalies follow patterns similar to quantum vacuum fluctuations led to the revolutionary anomaly detection system. The discovery that price paths exhibit holonomic memory unlocked the geometric phase calculations.
The Visual Revolution:
Creating visualizations that could represent 4-dimensional quantum fields on a 2D chart required innovative approaches. The multi-layer holonomy field, recursive quantum portals, and phase space flow representations went through dozens of iterations before achieving the perfect balance of beauty and functionality.
The Balancing Act:
Perhaps the greatest challenge was maintaining mathematical rigor while ensuring practical trading utility. Every formula had to be both theoretically sound and computationally efficient. Every visual had to be both aesthetically pleasing and information-rich.
The result is more than a strategy - it's a synthesis of pure mathematics and market reality that reveals the hidden order within apparent chaos.
📚 INTEGRATED DOCUMENTATION
Once applied to your chart, AHFT includes comprehensive tooltips on every input parameter. The source code contains detailed explanations of the mathematical theory, practical applications, and optimization guidelines. This published description provides the overview - the indicator itself is a complete educational resource.
⚠️ RISK DISCLAIMER
While AHFT employs advanced mathematical models derived from theoretical physics, markets remain inherently unpredictable. No mathematical model, regardless of sophistication, can guarantee future results. This strategy uses realistic commission ($0.62 per contract) and slippage (1 tick) in all calculations. Past performance does not guarantee future results. Always use appropriate risk management and never risk more than you can afford to lose.
🌟 CONCLUSION
The Anomalous Holonomy Field Theory represents a quantum leap in technical analysis - literally. By applying the profound insights of differential geometry, quantum field theory, and gauge theory to market analysis, AHFT reveals structure and opportunities invisible to traditional methods.
From the holonomy calculations that capture market memory to the anomaly detection that identifies phase transitions, from the adaptive intelligence that learns and evolves to the stunning visualizations that make the invisible visible, every component works in mathematical harmony.
This is more than a trading strategy. It's a new lens through which to view market reality.
Trade with the precision of physics. Trade with the power of mathematics. Trade with AHFT.
I hope this serves as a good replacement for Quantum Edge Pro - Adaptive AI until I'm able to fix it.
— Dskyz, Trade with insight. Trade with anticipation.
RSC123
The indicator automatically detects if you are on 2m/5m/15m and pulls out ATR & appropriate parameters – this way you can simply change timeframes and everything syncs.
AI-Optimized Gann IndicatorThe AI-Optimized Gann Angle System is a next-generation implementation of W.D. Gann's geometric trading principles, enhanced with AI logic, adaptive alerts, and real-time confidence scoring — specifically tuned for mid-volatility, large-cap trending stocks like AAPL, MSFT, NVDA, TSLA, UNH, JPM, and others.
Traditional Gann tools require manual plotting and static assumptions. This script automatically detects swing points using ATR-tuned ZigZag logic, dynamically draws key Gann angles (1x1, 2x1, 1x2, 3x1, 1x3), and evaluates price reactions in real time to create a confluence score, helping traders measure the reliability of the current geometry.
🔍 Key Features:
📐 AI-Powered Swing Detection
Uses ATR-multiplied thresholds and pivot logic to auto-select the most statistically valid anchor points.
📊 Dynamic Gann Angle Drawing
Angles like 1x1, 2x1, and 1x2 auto-project based on the current market regime, adapting to both steep and shallow trends.
🧠 Confluence Scoring System
Measures how frequently price respects projected Gann lines, displayed as a real-time reliability percentage.
🚨 Intelligent Alerting with Volume Filters
Get notified only when price is near key Gann levels and (optionally) confirmed by a volume spike for higher signal quality.
🎨 Adaptive Visuals & Dashboard
Clear visualization of anchor points, trend directions, real-time alerts, and volume confirmation — all in a compact table view.
🧠 Optimization Philosophy:
This system simulates an AI-style adaptation loop. It continuously tracks and adjusts based on:
Recent price volatility (ATR)
Trend steepness
Number of respected angle touches
Market structure evolution
While this is not using a neural network, the rule-based logic mimics machine learning feature prioritization — giving traders the power of AI without complexity.
✅ Recommended Instruments:
Designed and tuned for large-cap U.S. equities and index instruments that trend structurally with institutional flows.
Works best with:
AAPL, MSFT, NVDA, TSLA, AMZN, UNH, GOOG, JPM, SPY, QQQ, NDX, and more.
⏱️ Best Timeframes:
15 min, 1 hour, 4 hour, and Daily
Intraday scalping on volatile names
Swing trading in trend-following conditions
📌 Pro Tip: Set the anchor method to "Auto-Detect" for AI swing detection.
Use volume confirmation for higher-quality signals.
Confluence Score > 70% often aligns with key price decision zones.
🛠️ This is an open framework — use it standalone, or integrate with Smart Money Concepts (SMC), order block detection, or momentum filters for strategy refinement.
SLTP v3Sometimes when you are entrying a position or placing a limit/stop order, you only see one or even none key price level to set as TP (Take Profit) or SL (Stop Loss) conditional orders. You can use this SLTP to choose proper price levels to set as TP or SL. This indicator is highly custom. Remember to alter the color of the short side to your background color when you are about to long a security and do the same to the long side when you are about to short.
By the way the reference levels are based on volatility of last 14 bars of your security.
Will keep updating this indicator with high pratical value but not today. Peace out
有时当你进入一个头寸或设置限价/止损订单时，你可能只看到一个甚至没有关键价格水平可以设置为获利（Take Profit，TP）或止损（Stop Loss，SL）条件订单。你可以使用这个SLTP指标来选择合适的价格水平设置为TP或SL。这个指标高度可定制。当你打算买入证券时，记得将空头一侧的颜色改为与背景颜色一致；当你打算做空时，也对多头一侧做同样的调整。
顺便说一下，参考水平是基于证券最近14根K线的波动率来计算的。
我会持续更新这个具有高实用价值的指标，但不是今天。
祝好！
Pionex Signal Bot (Single/Multi Position)Guide: Integrating Your TradingView Strategy with a Signal Bot
This guide provides step-by-step instructions for connecting a TradingView strategy script with a compatible signal bot platform for automated execution, such as Pionex.
This script is based on DCA strategy execution, with the capability of customizable signal indicators by modifying the script section for modularity with minimal adjustments to adapt other source code. The default indicator is the moving average.
You will need an account on a compatible bot execution platform to execute the trades.
You will need a TradingView account with at least an Essential subscription for Alert and Webhook URL access.
A desktop browser is required to access the TradingView Pinescript Editor and the Signal bot configuration page on the execution platform.
1. Configuring the “Signal” on the Bot Execution Platform
Log in to your bot execution platform account (e.g., Pionex).
Navigate to the Futures → Futures Bot → Signal Bot section.
Click on the “Add signal” button and set the name and description for this signal, then click “Confirm.”
Once the signal has been created, directly click on the “I have completed the configuration” and “I have created the alert” buttons on the bot platform.
Signal setup on the bot execution platform has been completed.
2. Add a Strategy Script to the TradingView Chart
Log in to your TradingView account.
Choose the desired trading pair on your integrated exchange, and click the “ Launch chart “ button.
Click “Indicators”, select the Signal bot script you want to use.
Click the “Gear” icon to open the strategy settings, on the “Input” tab, copy the “Message” provided by your bot execution platform into the “Pionex Message” (or equivalent) textbox within the script's inputs.
On the “Properties” settings, refer to the recommended settings as follows:
• Initial capital: Keep this value at "100".
• Base currency: Keep this value at “Default”.
• Order size: 1 ~ 100 USDT. Keep the value within 1 to 100 USDT. 50 USDT may be translated as 50% fund utilization on the execution platform, such as Pionex .
• Pyramiding: 1 ~ any value. This value is for multi-position entry settings.
• Margin for long positions: Keep this value at "0".
• Margin for short positions: Keep this value at "0".
• Other parameters can be ignored as they do not impact the core configuration.
Strategy configuration in the TradingView chart has been completed.
3. Configuring the Strategy Alert on TradingView for Bot Connection
Log in to your TradingView account.
Click on the “Alarm” icon in the upper right corner, and click the “+” icon to create a new alert.
In the “Settings” tab, choose the desired strategy from the list.
Note: The latest configuration will typically be at the bottom of the list and may need to be updated every time there are changes to the strategy “Input” configuration.
In the “Message” tab, keep the value unchanged as the default content.
Note: This variable will produce the necessary JSON code for the trading instruction.
In the “Notification” tab, enable the “Webhook URL” and paste the Webhook URL obtained from your bot execution platform into the “Webhook URL” field in TradingView.
Click the “Create” button to complete the setup, and the alert will appear in the “Alert” list.
Strategy Alert configuration in the TradingView chart has been completed.
4. Creating the Signal Bot on the Execution Platform with the Linked Strategy
Log in to your bot execution platform account (e.g., Pionex).
Navigate to Futures → Futures Bot → Signal Bot.
On the “Signal Bot” page, click the “Automate signal” button to configure the bot settings, and then click the “Create the bot.”
The Signal bot creation on the execution platform has been completed.
5. Checking Signal Transmission Between TradingView and Bot Platform
Log in to your TradingView account.
Click on the “Alarm” icon in the upper right corner, and click the “Log” tab to check the alert history.
Log in to your bot execution platform account (e.g., Pionex).
Click on “Details” for your bot and then navigate to the “Signal Log” tab.
Compare the TradingView Alert log with the bot execution platform's Signal Log to ensure the signals are received properly.
To understand the raw Message content, manual interpretation or platform-specific tools may be required.
6. How to Add Other Indicator into the Strategy Script for the Signal Bot
Log in to your TradingView account.
Obtain the open-source indicator, such as “RSI”, into the TradingView chart, and copy its Pine Script™ source code.
Open the Signal bot strategy script in the Pine Script™ Editor. This script is typically optimized for integration with the bot execution platform.
Paste the custom indicator source code into the specific designated section for custom indicators within the Signal bot strategy script.
Define the conditions for “Long” (buy) and “Short” (sell) entries from your custom indicator into the pre-defined “longCondition” and “shortCondition” variables within the script.
Click the “Add to chart” or “Update on chart” button to complete the script configuration and apply changes to your chart.
Integrating a custom indicator into the strategy script has been completed.
Rolling VWAP Channel [LuxAlgo]The Rolling VWAP Channel indicator creates a channel by analyzing a large number of Volume Weighted Average Prices (VWAPs) and determining a Channel based on percentile linear interpolation throughout the VWAPs.
🔶 USAGE
In this indicator, we have formed a Channel by first calculating multiple VWAPs, each with their respective anchor, then locating prices using "Percentile Linear Interpolation".
Note: Percentile Linear Interpolation locates the price point at which a specified percentage of VWAPs fall below it.
For example, a percentile of 50% would mean that 50% of the VWAP values fall below this price.
This method of analysis is important since the VWAPs are not often evenly distributed; therefore, we are able to draw importance to different levels by analyzing in percentiles.
When visualized, there is typically clustering of the VWAP values, which occurs at any given time, as seen below.
The channel can be tailored to each individual, with full control of each percentile represented in the channel. That being said, a general concept is that these clustered areas are clear results of sideways price action, which would lead us to believe that after interactions at these levels, we should expect to see a directional decision made by the market closely after.
🔶 DETAILS
The Rolling VWAP calculation calculates a user-specified number of VWAPs (up to 500), each anchored to a unique starting point in the chart based on the start of a new timeframe.
Each new timeframe that occurs causes a new VWAP to initialize. When the total number of desired VWAPs is reached, the oldest VWAP is removed and re-initialized, anchored to the current bar. Hence, the name " Rolling " VWAPs
This method allows us to automatically generate and manage large amounts of VWAPs without the need for user interaction.
After we have generated these VWAPs, we are able to run analyses on their returned values, such as the "Percentile Linear Interpolation" mentioned in the section above.
🔶 SETTINGS
Anchor Period: Choose which time period to use as the anchor point to initialize new VWAPs from.
VWAP Source: Choose the source for your VWAPs to calculate.
VWAP Amount: Sets the number of VWAPs to use. After this amount is on the chart, the oldest will be rolled.
🔹 Channel Lines
Toggle: Enable the associated VWAP Channel percentile line.
Percentile: Adjust each line's percentile independently for your needs.
Width: Adjust the width of the associated percentile line.
🔹 Calculation
Calculated Bars: Tells the indicator how many bars to calculate on, for faster calculations with less history, use a lower value. Setting this to 0 will remove the bar constraint.
Technical Strength Index (TSI)📘 TSI with Dynamic Bands – Technical Strength Index
The TSI with Dynamic Bands is a multi-factor indicator designed to measure the statistical strength and structure of a trend. It combines several quantitative metrics into a single, normalized score between 0 and 1, allowing traders to assess the technical quality of market moves and detect overbought/oversold conditions with adaptive precision.
🧠 Core Components
This indicator draws from the StatMetrics library, blending:
📈 Trend Persistence: via the Hurst exponent, indicating whether price action is mean-reverting or trending.
📉 Risk-Adjusted Volatility: via the inverted , rewarding smoother, less erratic price movement.
🚀 Momentum Strength: using a combination of directional momentum and Z-score–normalized returns.
These components are normalized and averaged into the TSI line.
🎯 Features
TSI Line: Composite score of trend quality (0 = weak/noise, 1 = strong/structured).
Dynamic Bands: Mean ± 1 standard deviation envelopes provide adaptive context.
Overbought/Oversold Detection: Based on a rolling quantile (e.g. 90th/10th percentile of TSI history).
Signal Strength Bar (optional): Measures how statistically extreme the current TSI value is, helping validate confidence in trade setups.
Dynamic Color Cues: Background and bar gradients help visually identify statistically significant zones.
📈 How to Use
Look for overbought (red background) or oversold (green background) conditions as potential reversal zones.
Confirm trend strength with the optional signal strength bar — stronger values suggest higher signal confidence.
Use the TSI line and context bands to filter out noisy ranges and focus on structured price moves.
⚙️ Inputs
Lookback Period: Controls the smoothing and window size for statistical calculations.
Overbought/Oversold Quantiles: Adjust the thresholds for signal zones.
Plot Signal Strength: Enable or disable the signal confidence bar.
Overlay Signal Strength: Show signal strength in the same panel (compact) or not (cleaner TSI-only view).
🛠 Example Use Cases
Mean reversion traders identifying reversal zones with statistical backing
Momentum/Trend traders confirming structure before entries
Quantitative dashboards or multi-asset screening tools
⚠️ Disclaimer
This script is for educational and informational purposes only. It does not constitute financial advice or a recommendation to buy or sell any financial instrument.
This AI is not a financial advisor; please consult your financial advisor for personalized advice.
